Laser Distance Meters LDM43 | AK-Industries Vietnam | Pitesco Vietnam


The LDM43 is an opto-electronic sensor for linear displacement measurement.
Thanks to its PROFIBUS DP and SSI interfaces this product can easily be integrated into your processes.
Its robust and compact construction, low power consumption and its measurement range setup make that sensor a very easily integrated device into your system.

Applications

- Distance measurement
- Positioning
- Level control
- Mobile positioning (camera for example)
- Positioning of stacker crane and gantry crane
- Staff safety and behaviour study (top athletes for example)
- Redundant with others sensors principles

Datasheet

Measuring range
1
0.1 m ... 30 m on natural surfaces ; up to maximum 150 m on target board 
Measuring accuracy 
2
 ± 3 mm (+15°C … +30°C) ; ± 5 mm (-10°C … +50°C)  Measured value resolution  0.1 mm 
Reproducibility  < 0.5 mm 
Time to measure  0.16 s ... 6 s 
Laser classification  Laser class 2, < 1 mW according to IEC 825-1 / EN 60825 
Wavelength  650 nm (red) 
Divergence measurement beam  0.6 mrad 
Connector  1 x 12 pins (Binder serie 723) M18 , 
1x 5 pins (Binder serie 766) M12 B-coded 
Profibus data  Profibus RS485 DP-V0 slave under IEC 61158 / IEC 61784, 
Transmission rate : 9.6 /19.2/93.75/187.5/500 kBauds, 1.5/3/6/12 Mbauds, 
Automatic baud rate detection, outer loop resistance 
GSD file  LDM409CB.GSD, PNO Profile Encoder Class 1/2, configuration of measuring parameters, 
output of measured values and error messages. 
SSI Interface  Transfer rate 50kHz. 1 MHz, Signal input to output difference signal (RS422), 
24 bit, Gray encoded 
Operating modes  Continuous measurement, extern trigger 
Output signal  High signal = Uv - 2 V and low signal< 2 V, output current up to 0.5 A protected against 
short-circuits. Free programmable switching threshold and hysteresis. 
Analog output  Adjustable 4…20mA, overruns monitoring. Load resistance ≤ 500Ω 
Trigger input  Adjustable trigger level and delay, trigger pulse max 24 V 
Supply voltage (UV)  10 ... 30 V DC 
Maximum power consumption  3.2W - at 24 V DC 
Operating temperature  -10 °C ... +50 °C The laser power switches off if temperature exceeds a predefined threshold 
Storage temperature  -20 °C ... +70 °C 
Dimensions (L x W x H)  212 mm x 96 mm x 50 mm 
Internal protection class  IP 65 
EMC  EM 61000-6-2, EN 55011
  • LDM41/42 - MEASURING RANGE UP TO 150 METERS

  • LDM43 - MEASURING RANGE UP TO 150 METERS

  • LDS30 - MEASURING RANGE UP TO 250 METERS

  • LDM301 - MEASURING RANGE UP TO 3000 METERS